Skip to main content
Healthcare & Medical

Chiropractic Office Moving in Boston and MetroWest

Hi-lo, drop, and flexion-distraction tables moved intact following the manufacturer's guidance, with any x-ray unit released and reinstalled by its vendor.

(774) 421-9389
Chiropractic Office moving in Boston and MetroWest: moving crew at work
  • Licensed & Insured Fully Covered
  • Owner-Operated By Tyler Trefrey
  • 10 States Northeast Served

Start your free chiropractic office move quote

verified For estimate purposes only credit_card_off No credit card required

Planning a Chiropractic Office Move

Chiropractic patients come back often, sometimes several times a week, so a practice cannot close for long. Most offices want to adjust on Friday at the old address and on Monday at the new one. What makes that hard is the adjusting tables. An electric hi-lo table, a drop table with its sections, or a flexion-distraction table is heavy, top-heavy, and full of mechanisms that do not like being tipped or carried by the wrong part.

We move tables intact whenever the manufacturer allows it, following its moving instructions: fully lowered, unplugged, drop sections locked, headpieces secured, and carried on a padded dolly by the frame, never by the cushions. If the manual says a table must be partly taken apart or handled by the dealer, the dealer does that part. Any x-ray unit, and the paperwork a new address may require for it, stays with your x-ray vendor. Therapy modalities, rehab equipment, and the front desk come across with the tables, and the healthcare moving page covers how clinical vendors fit in.

Who usually signs off
Practice owner or office manager who approves the treatment-room layout and obtains each table's transport instructions
Timing that works
A Saturday after the last adjustments of the week, on request, so patients on a regular schedule miss as few visits as possible.

What typically moves

  • Electric hi-lo adjusting tables Lowered fully, unplugged, and moved upright on a padded dolly by the frame, as the maker's instructions describe.
  • Drop and flexion-distraction tables Drop sections locked and headpieces secured before the move, then checked at the new room.
  • Therapy modality carts and units E-stim and ultrasound units ride on their carts or in padded boxes, with cables and pads bagged with each.
  • Rehab area mats, balls, bands, and wall racks Loose items boxed by area; freestanding racks moved upright.
  • Massage and treatment room tables Folded or moved intact depending on design, and set in the rooms your plan shows.
  • Front desk, waiting room, and patient-education displays Placed ahead of the rehab floor, because Monday's first patient arrives at the counter.

Access and scheduling

If the practice has imaging, get the x-ray company's pull-out and hook-up dates before choosing a Saturday. The usual rhythm is patients Friday, crew Saturday on request, patients again Monday.

Chiropractic offices around Greater Boston are often ground-floor suites in plazas on Routes 9, 1, and 135, or in town centers like Franklin, Natick, and Needham, with a front door on a parking lot. That makes the carry easy, but a heavy table on a curb, a lip, or a wet ramp needs care. Offices in medical buildings in Brookline and Newton book a freight elevator, and property management expects our insurance paperwork before it holds one; we send it on request. In winter we salt and cover entrances, because a table on ice is the worst case.

Protection and handling

Vinyl table tops split along the seams when someone grabs them to lift, so tables are fully wrapped and moved by the frame, not the upholstery. Electric tables are lowered all the way before they are unplugged, so they travel with their center of gravity as low as it goes. Drop sections are locked, and headpieces and armrests are secured or removed as the manual says.

Therapy modality units are packed in padded boxes or ride on their carts with cables bagged. At the new office, each table goes to its room, is set on the floor where the doctor wants it, and is raised and lowered once to check it works. Patient files, if the practice still has paper, are packed and sealed by staff.

Who does what

Some of this job belongs to other trades. The written plan names each one.

X-ray unit and anything needing registration at the new address
The imaging company takes the unit out of service, installs and checks it in the new room, and files whatever the new location needs.
Tables the manufacturer says must be handled by the dealer
The dealer's technician prepares or partly disassembles them; we can carry the parts once released.
Spinal decompression and other electrically wired equipment
The equipment vendor disconnects and reinstalls anything wired to the building.

Not part of our work

  • Removing, moving, or reinstalling x-ray equipment.
  • Repairing table mechanisms or electrical parts.

Around Boston and MetroWest

Chiropractic offices are spread across Greater Boston's plazas and town centers: Route 9 in Framingham and Natick, Norwood and Dedham along Route 1, Ashland and Hopkinton along Route 135, and the main streets of Franklin, Milford, and Needham. Offices in Brookline and Newton medical buildings are the exception, with freight elevators and shared entrances.

The crew that shows up

Eastside Movers crew in the snow outside Massachusetts colonials in winter

Chiropractic Office Moving FAQs

Another question? Call (774) 421-9389.

Can our electric hi-lo adjusting tables be moved without taking them apart?

Usually, yes, if the manufacturer's instructions allow it. We lower the table fully, unplug it, and move it upright on a padded dolly by the frame. Some models ask for the headpiece or armrests to come off, and a few ask for a dealer to prepare them. We read the manual first and follow it.

How does a chiropractic office move without patients missing adjustments?

Adjust Friday, move Saturday, and open Monday. The tables and the front desk are the first things set at the new office, so adjusting rooms are ready before rehab or admin areas. Patients on a regular schedule usually miss nothing, and your front desk can remind them of the new address the week before.

Who handles our x-ray equipment when we move?

Your x-ray vendor. X-ray units have to be removed, reinstalled, and tested by a qualified technician, and a new location may need paperwork. We keep the room clear until the vendor is done and move the rest of the office around their schedule. Book the vendor before you pick the moving date.

What happens if a table stops working after the move?

We test each table by raising and lowering it once it is set in its room, before we leave. If something does not work, we tell you right away so you can call the dealer. Most problems after a move come from a pinched cord or a lock left engaged, which we check for first.

Plan your business move

Tell us both addresses, the building rules you know about, and the dates you cannot move. We will send back a written plan and estimate.

Call (774) 421-9389

Mon–Sat 8:00 AM – 5:00 PM

Call Now call 774-421-9389